Auto-Generated Summary

> Provide an extensive summary of the agreements by topic. No need to mention CRs.

Summary of Agreements by Topic

Initial Access Aspects

• Support for Discovery Burst Transmission Window (DBTW) for 120 kHz SCS, with parameter indication using subCarrierSpacingCommon and potentially pdcch-ConfigSIB1 or spare-bit fields.
• SSB slot patterns for 480/960 kHz SCS include first symbols {2, 9} + 14*n, with non-contiguous slot patterns and scaled gaps.
• PRACH configuration supports PRACH length L=571 for 480 kHz, with no gap between consecutive ROs for 480/960 kHz PRACH.
• Multiplexing pattern 1 supported for CORESET#0/Type0-PDCCH configurations at 480 and 960 kHz SCS.
• No explicit indication of licensed/unlicensed operation in MIB or PBCH payload.

PDCCH Monitoring Enhancements

• Multi-slot PDCCH monitoring based on slots within a slot group, with mandatory BD/CCE budget reporting for X=4/8 slots (480/960 kHz SCS).
• Group (1) search spaces restricted to Y consecutive slots within a slot group, while Group (2) search spaces can be configured anywhere within the slot group.
• Type0-PDCCH monitoring options include monitoring in slot n0 only or slots n0 and n0+1.

PUCCH Formats 0/1/4 Enhancements

• Sub-PRB interlaced mapping (Alt-2) not supported for PF0/1, and DMRS for enhanced PF4 uses all REs within each RB.
• RRC parameter configures the number of RBs per PUCCH resource, with a maximum of 16 RBs for 120, 480, and 960 kHz SCS.
• No enhancement to cyclic shift definition for PF0/1.

Beam Management for New SCSs

• Candidate values for maxNumberRxTxBeamSwitchDL include 1, 4, and 7 for 960 kHz, with beam switching time delays of 28 symbols for 120 kHz and 56/112 symbols for 480 kHz.
• Single DCI field ‘Transmission Configuration Indication’ indicates one or two TCI states for multi-PDSCH scheduling.
• Minimum guard period Y between two SRS resources supported for 480/960 kHz.

PDSCH/PUSCH Enhancements

• Timing parameters for k0, k1, and k2 defined with ranges: k0 (0 ~ 128), k1 (-1 ~ 127 for DCI format 1_1; 0 ~ 127 for DCI format 1_2), and k2 (0 ~ 128).
• CSI computation delay adopts Z1, Z2, and Z3 values to maintain the same absolute time duration as 120 kHz SCS.
• No support for increased PTRS frequency density for CP-OFDM or PTRS enhancement for DFT-s-OFDM.
• HARQ process number applied to the first valid PDSCH/PUSCH scheduled by a DCI.
• Maximum number of PDSCHs/PUSCHs scheduled by a single DCI is 8 for 120, 480, and 960 kHz SCS.

Channel Access Mechanism

• Single energy measurement within 8us deferral period supported.
• COT sharing supports scenarios with no maximum gap or a defined maximum gap Y requiring Cat 2 LBT.
• UE uses the same beam for sensing and transmission if beam correspondence is indicated.
• Extend Rel.16 L3-RSSI to unlicensed operation in FR2-2, with RRC configuration for reference SCS, measurement duration, and bandwidth.
• No consensus to explicitly support single LBT covering multiple CCs under CA.

Other Topics

• No explicit indication of licensed/unlicensed operation via synchronization raster entries.
• No support for PTRS enhancement for CP-OFDM or DFT-s-OFDM in Rel-17.
• No additional candidate values for timeDurationForQCL, beamSwitchTiming, and beamReportTiming.